MotoShop

Puch Moped - 277 items found

	Puch Maxi Moped Stock Chrome Exhaust Pipe Good Cond NR British & European > Exhaust $4.99 Bids: 0 End time: 15-Sep-10 19:34:12 PDT

	Puch moped E50 clutch cover gasket TEFLON! Other Vehicle Parts > Other $6.00 Bids: 0 End time: 08-Oct-10 12:41:33 PDT

	PUCH MOPED 1978 MAXI SPORT SET OF SIDE COVERS NICE L@@K British & European > Other Parts $22.75 Bids: 0 End time: 08-Oct-10 11:44:30 PDT

	Puch moped TEFLON intake gasket Other Vehicle Parts > Other $3.00 Bids: 0 End time: 08-Oct-10 11:27:01 PDT

	Puch Moped Ignition Cover Other Vehicle Parts > Scooter Parts $17.50: $19.5 Bids: 0 End time: 15-Sep-10 08:05:07 PDT

	moped motobecane MISC parts lot mobylette puch LOOK Other Vehicle Parts > Scooter Parts $0.99 Bids: 0 End time: 14-Sep-10 23:22:50 PDT

	moped Batavus PUCH Peugeot Sachs more magura parts II Other Vehicle Parts > Scooter Parts $0.99 Bids: 0 End time: 12-Sep-10 22:33:38 PDT

	moped Garelli noi engine w/covers minarelli tomos puch Other Vehicle Parts > Scooter Parts $49.95 Bids: 0 End time: 14-Sep-10 22:18:24 PDT

	moped tomos targa LX seat custom puch honda toptank nr Other Vehicle Parts > Scooter Parts $0.99 Bids: 0 End time: 14-Sep-10 22:07:20 PDT

	moped brake cable puch minarelli sachs garelli moby ??? Other Vehicle Parts > Scooter Parts $0.99 Bids: 0 End time: 14-Sep-10 21:54:55 PDT

View more items

Array

My puch maxi moped 64cc polini kit, 19mm dellorto, modified biturbo pipe, ported case, new clutch, tires..... Speedometer goes up to 40mph, one ...

Q:
carson_...	puch moped? ok i found a puch moped on the side of the road and me and a friend took it... it is a 1985 model. can someone send me a wiring guide or a overall map of the machine?
A:(from Cody Ridner)
Hi carson its me cody NABIOR DiD find something thing........ go to 1985 puch moped.com and hit how tos
Q:
Lyle R	How do you know if your puch moped is a maxi or a magnum? I have a puch moped and i would like to get parts for it, but I don't know if it is a maxi or magnum. It is a one and a half horse power engine
A:(from guardrailjim)
I would guess that the magnum looks like a motorcycle. But what do I know, ask the experts - http://www.mopedarmy.com/ Go to - Photos - View Photos - Puch
Q:
timmyb74	My son bought a 1980 Puch moped. We don't know how to get it started or how it works if we do. Any help? According to the info on the side of the bike it is a 2 HP motor that you aren't allowed to use unleaded gas in. Apparently it runs on a gas/oil mixture as there are instructions for mixing them. The rear tire is flat and there is a shock bolt missing. The front brake is very weak. He just wants something to fool around on the farm with. I would just like to get the engine running before I spend any money fixing anything else.
A:(from Carl_the_Truth)
I'd bury it. It'll cost more to fix than it's worth...
Q:
luke w	my puch moped wont go over 30MPH how can i make it faster? i heard that they can go 85 MPH with ajustments what are some ajusments i could make?
A:(from mp_101st)
New carburetor, exhaust pipe, gearing (sprockets), bored out motor, find and eliminate the governor. There is small stuff you can do to try to improve speed, but alot of it is gonna cost some money to get it to haul. Ive seen those moped really move so just look around the internet because I know they make mods for them.
Q:
luke w	how do i remove the governor from my PUCH moped? i can not locate my gvernor to remove it can any one help also if you have any tips to make it go faster i would apriciate it. Thank You
A:(from e p)
There isn't a "governor", only a few restrictive parts. The main restriction in the system is the huge metal washer in the cylinder if you have a 1hp. Either dremel it out and clean it up really well, or get a cylinder kit. The next restriction is the exhaust. the header probably has two pins in it. Drill those out (if you get a new kit you will need an aftermarket exhaust). The final restriction is the carburetor and intake you need to either get new ones, or drill out your 30+ year old ones.

Puch Moped - News

Höllenritt für Halbstarke - Spiegel Online

Spiegel Online, Germany - Nov 25, 2008

Höllenritt für Halbstarke Im Herbst 1984 schloss Zündapp die Pforten, gefolgt von Puch im Jahre 1987. Die Absatzzahlen der Hersteller rauschten in den Keller.